Templates by BIGtheme NET

Video conferencing terminal device connection instructions

First, confirm the equipment

Video conferencing equipment is divided into two boxes, received after the out of the box to check the equipment to confirm the two boxes contain the following cables and equipment: video conferencing terminal equipment, wireless keyboard, microphone, camera, Video video cable, video conferencing terminal power cord, Camera power cord, camera remote control, RS232 transfer serial cable, RS232 video cable, wireless keyboard receiver, wireless keyboard receiver, spare video cable.

Second, the equipment connection

       1, connect the video conferencing terminal power cord to the device, one end connected to the power outlet, the other end connected to the terminal device power interface.

       2, set up the camera with a bracket, and connect the camera power cord to the device, one end of the power cord to connect the power outlet, the other end connected to the camera power connector.

       3, respectively, connect Video cable to the camera and video conferencing terminal equipment, Video line connected to one end of the camera Video interface, the other end connected video conferencing terminal equipment BNC1 interface.

       4, connect RS232 transfer serial cable and RS232 video cable.

       5, the transfer of RS232 video cable connected to the camera and video conferencing equipment, RS232 video cable connected to one end of the camera RS232C IN interface, the other end of the video conference terminal equipment connected to the RS232 interface.

       6, connect the microphone to the video conferencing terminal equipment, microphone cable USB interface connected to the video conferencing terminal device USB interface, 3.5-inch audio interface connected to the video conference terminal equipment MIC IN interface.

       7, connect the projector and video conferencing terminal equipment, VGA cable connected to one end of the projector, the other end of the video conference terminal connected to the VGA port.

       8, connect the network cable to the video conferencing terminal equipment, one end of the network cable connected to the network, the other end connected to the video conferencing terminal equipment LAN interface.

       9, connect the power amplifier and video conferencing terminal equipment, 3.5-inch audio interface connected to the video conference terminal equipment LINE OUT interface, Lotus audio interface connected to the power amplifier equipment.

       10, connect the wireless keyboard receiver to the video conferencing terminal device USB interface.

       11, open the power button, open the video conference terminal device back switch button, press the front panel PWR button,

       12, video conferencing terminal equipment starts normally, use is complete, click the “menu” button, select “exit

More details, you can contact with ezTalks video conferencing 7*24h.

ăn dặm kiểu NhậtResponsive WordPress Themenhà cấp 4 nông thônthời trang trẻ emgiày cao gótshop giày nữdownload wordpress pluginsmẫu biệt thự đẹpepichouseáo sơ mi nữhouse beautiful